Icidu NI-707549 Page 58 Manual Download

Page: 58 / 106

NI-7075349

Wireless Router 300N

- 52 -

section of the packets statistics. The result of the statistics is used for analysis by SYN Flood,

UDP Flood and ICMP-Flood.

DoS Protection - Denial of Service protection. Check the Enable or Disable button to

enable or disable the DoS protection function. Only when it is enabled, will the flood filters be

enabled.

Note:

Dos Protection will take effect only when the Traffic Statistics in “System Tool

→

Traffic

Statistics” is enabled.

Enable ICMP-FLOOD Attack Filtering - Enable or Disable the ICMP-FLOOD Attack

Filtering.

ICMP-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value

between 5 ~ 3600. When the current ICMP-FLOOD Packets number is beyond the set value,

the Router will startup the blocking function immediately.

Enable UDP-FLOOD Filtering - Enable or Disable the UDP-FLOOD Filtering.

UDP-FLOOD Packets Threshold (5~3600) - The default value is 500. Enter a value

between 5 ~ 3600. When the current UPD-FLOOD Packets number is beyond the set value,

the Router will startup the blocking function immediately.

Enable TCP-SYN-FLOOD Attack Filtering - Enable or Disable the TCP-SYN-FLOOD

Attack Filtering.

TCP-SYN-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value

between 5 ~ 3600. When the current TCP-SYN-FLOOD Packets numbers is beyond the set

value, the Router will startup the blocking function immediately.

Ignore Ping Packet From WAN Port to Router - Enable or Disable Ignore Ping Packet

From WAN Port to Router. The default setting is disabled. If enabled, the ping packet from

the Internet cannot access the Router.

Forbid Ping Packet From LAN Port to Router - Enable or Disable Forbid Ping Packet From

LAN Port to Router. The default setting is disabled. If enabled, the ping packet from LAN

cannot access the Router. This function can be used to defend against some viruses.

Click the Save button to save the settings.

Click the Blocked DoS Host List button to display the DoS host table by blocking.

4.9.3 Local Management

Choose menu “Security

→

Local Management”, you can configure the management rule in the

screen as shown in Figure 4-41. The management feature allows you to deny computers in LAN

from accessing the Router.

Summary of Contents for NI-707549











































































































Search results

Summary of Contents for NI-707549

Reviews:

Related manuals for NI-707549

Brands by name

Popular brands

Icidu NI-707549, Manual

Search results

Summary of Contents for NI-707549

Reviews:

Related manuals for NI-707549

Brands by name

Popular brands