Icidu NI-707549 Manual Download

Page: 31 / 106

NI-7075349

Wireless Router 300N

- 25 -

Router during login, please click “Use IP address specified by ISP” check box and enter the

IP address provided by your ISP in dotted-decimal notation.

Detect Online Interval - The Router will detect Access Concentrator online at every interval.

The default value is “0”. You can input the value between “0” and “120”. The value “0” means

no detect.

Primary DNS/Secondary DNS - If your ISP does not automatically assign DNS addresses to

the Router during login, please click “Use the following DNS servers” check box and enter

the IP address in dotted-decimal notation of your ISP’s primary DNS server. If a secondary

DNS server address is available, enter it as well.

Click the Save button to save your settings.

4. If your ISP provides BigPond Cable (or Heart Beat Signal) connection, please select

BigPond Cable. And you should enter the following parameters (Figure 4-10):

Figure 4-10

User Name/Password - Enter the User Name and Password provided by your ISP. These

fields are case-sensitive.

Auth Server - Enter the authenticating server IP address or host name.

Auth Domain - Type in the domain suffix server name based on your location.

Summary of Contents for NI-707549











































































































Search results

Summary of Contents for NI-707549

Reviews:

Related manuals for NI-707549

Brands by name

Popular brands

Icidu NI-707549, Manual

Search results

Summary of Contents for NI-707549

Reviews:

Related manuals for NI-707549

Brands by name

Popular brands