iCharger 1010B, User Manual

Page: 2 / 22

-2-
iCharger Synchronous Balance Charger/Discharger 1010B/106B
Thank you for purchasing one of the iCharger series. Please read the entire User’s Manual completely and
attentively as it contains a wide variety of specific programming and safety information.
Specifications
1010B 106B
Input voltage range
：
10.0 – 18.0VDC 10.0 – 18.0VDC
Charge current range
：
0.05 – 10.0A 0.05 – 10.0A
Discharge current range
：
0.05 – 7.0A 0.05 – 7.0A
Maximum charge power capacity
：
200W (adjustable) 180W (adjustable)
Maximum discharge power capacity
：
30W (adjustable) 20W (adjustable)
Current drain for balancing
：
<300mA <300mA
Balance accuracy
：
<10mV <10mV
Lithium (LiPo/LiIo/LiFe) battery cell count
：
1 – 10 series 1 – 6 series
NiCd/NiMH battery cell count
：
1 – 25 series 1 – 17 series
Pb battery cell count
：
1 – 18 series (2
–
36V) 1 – 12 series (2 – 24V)
Battery setup memories
：
10 10
Intelligent temperature control
：
Yes Yes
Weight
：
400g 350g
Dimensions(L X W X D)
：
143X97X26mm 134X83X25mm
5.63”X3.82”X1.02” 5.28”X3.27”X0.98”
Special features
High power, high current, high-performance power conversion circuit. The iCharger series uses
advanced Synchronous buck-boost DC/DC converter technology with an output conversion efficiency
that can reach over 90%. This not only saves power and reduces heat build up but also makes the
charger more compact and conveniently mobile.
Two input power choices: DC jack with auto-resetting fuse (maximum input current 7A for 1010B and 6A
for 106B) and butt-welded alligator clips with 4mm bullet connectors (25A).The output power can be
adjusted to align with the available input power, thus preventting input current overload and protecting
the DC source.
The iCharger series can be used with three types of Lithium batteries - LiPo, Lilo, LiFe - and has a fully
integrated cell balancer.
Internal temperature sensor and temperature controlled automatic cooling FAN controls the internal
temperature and provides intelligent protection. When the internal temperature is over 60
℃
(140
o
F), the
output power is automatically reduced by 25%. If the temperature exceeds 65
℃
(149
o
F) the charge cycle
is stopped.
Convenient set of 10 battery profile memories that can be saved and loaded by number.
2x16 backlit LCD screen that provides rich information including active mode, current, voltage, total
charge (mAh), charging time and temperature etc.
Various charging/discharging settings and cycles to meet a wide range of customer needs. For Lithium
batteries: balance charging, normal charging, fast charging, storage, discharging, charge/discharge
cycling, and battery monitoring. For NiCd/NiMH batteries: charging-auto, charging-manual, discharging
and charge/discharge cycling. For Pb batteries: charging and discharging.
Unique Lithium battery Monitor program. When you use other equipment to charge or discharge a
Lithium pack, you can use the
iCharger to monitor the per-cell voltages, battery temperature and
process time. If any individual cell appears over-charged or over-discharged or the pack is too hot or the
process has gone on for too long, the
iCharger will generate an alarm sound and the related information
will blink.
Electric motor test mode can be used to run-in electric motors, test motor parameters and performance,
check tolerances etc.
Perfect protection. The iCharger has protection for reversed polarity (input or output), low input voltage,
battery temperature, charging capacity and time overrun.