iCharger 1010B, User Manual

Page: 8 / 22

-8-
iCharger Synchronous Balance Charger/Discharger 1010B/106B
When NiMH&NiCd batteries are deeply discharged or left unused for a long
time, they will produce a false -
△
V which stops charging early. You can
disable -
△
V testing to avoid this problem.
Range: 0 – 30min (0, default)
Battery upper temperature limit. The battery temperature can be monitored
with the attached temperature sensor. In order to protect the battery from
damage due to high temperatures the
iCharger will stop charging or
discharging immediately if the temperature exceeds the cut-off setting.
Users can choose
℃
or
o
F as the temperature unit
Range: 20 – 80
℃
℃ ℃
℃
(68 – 176
o
F).
o
F = (9/5)×
℃
℃ ℃
℃
+32.
Charging time upper limit. The charging process will stop immediately if it
exceeds the set value.
Range: 1 – 999min
Capacity protection. The charging/discharging process will stop immediately
if the calculated charge input/drained exceeds the set value.
Range: 100 – 99900mAh
Input voltage protection lower limit. The charging/discharging process will
stop immediately if the input voltage falls below the set value.
Range: 10.00 – 15.00V (10.00V, default)
Charge/Discharge power limit. The maximum charge/discharge power of
iCharger can be adjusted in order to limit internal temperature and to
protect the input current from over-loading . When the limit is set to AUTO
the iCharger can adjust the output charging power according to the input
capability.
CHG: 50 – 200W (180W for 106B
）
） ）
）
and AUTO.
DCHG: 5 – 30W (20W for 106B
） ） ） ）
Key confirmation and alert tone. If the keyboard sound is ON there will be a
beep when you press any key. If the buzzer is ON the
iCharger will
generate an alert tone for certain events.
Key Beep: OFF&ON: (ON, default)
Buzzer: OFF&ON: (ON, default)
Process completion tone. Controls the tones generated at end of charging
or discharging and the cyclic charging/discharging indication.
Options: Beep 5 times, Beep 3 minutes, Beep always (continuous until
user presses STOP), Beep OFF
(Beep always, default)
Back-light and cooling fan control. Adjust the
LCD backlight brightness.
There are three cooling fan modes: ON, OFF, AUTO. In AUTO-Mode,
iCharger adjusts the fan automatically to control its internal temperature.
Cooling fan: OFF, ON & AUTO: (AUTO, default)
Temp. Cut
Temp. Cut Temp. Cut
Temp. Cut-
- -
-Off
Off Off
Off
ON 50 ON 50 ON 50 ON 50℃ ℃ ℃ ℃
-
Dec
+
Inc
Safety timer Safety timer Safety timer Safety timer
ON 120min ON 120min ON 120min ON 120min
Capacity Cut Capacity Cut Capacity Cut Capacity Cut- - - -Off Off Off Off
ON 5000mAh
ON 5000mAh ON 5000mAh
ON 5000mAh
Input power low Input power low Input power low Input power low
Cut Cut Cut Cut- - - -Off 10.00V Off 10.00V Off 10.00V Off 10.00V
Wat Wat Wat Watt t t t Limit (W) Limit (W) Limit (W) Limit (W)
CHG
CHG CHG
CHG:AUTO
:AUTO :AUTO
:AUTO DCHG:20
DCHG:20 DCHG:20
DCHG:20
Inc Dec
Inc Dec
Inc Dec
NiMH/
NiMH/ NiMH/
NiMH/NiCd
NiCd NiCd
NiCd Check
Check Check
Check
Delay 0min Delay 0min Delay 0min Delay 0min
Key Beep
Key Beep Key Beep
Key Beep ON
ON ON
ON
Buzzer Buzzer Buzzer Buzzer ON ON ON ON
-
Dec
+
Inc
Inc Dec
Inc
Dec
Inc Dec
Inc Dec
Back Back Back Back- - - -light light light light 5 5 5 50% 0% 0% 0%
Cooling fan AUTO
Cooling fan AUTO Cooling fan AUTO
Cooling fan AUTO
Completion Ring Completion Ring Completion Ring Completion Ring
Beep always Beep always Beep always Beep always
-
Dec
+
Inc
Inc Dec
-
Dec
+
Inc
-
Dec
+
Inc
-
Dec
+
Inc
-
Dec
+
Inc
-
Dec
+
Inc
-
Dec
+
Inc
-
Dec
+
Inc
-
Dec
+
Inc
-
Dec
+
Inc
-
Dec
+
Inc