ICC Link Series Web User Manual Download

Page: 4 / 125

Wireless Web Interface User’s Manual

Safety precautions

For safe and efﬁcient use, read the following information.

Text conventions

Table 0-1: Text conventions

Icon

Description

NOTE

Emphasizes information to improve product use.

IMPORTANT

Indicates important information or instructions that must be followed.

Indicates how to avoid equipment damage or faulty application.

Issues warnings to avoid personal injury.

Below is a listing of safety precautions and deﬁnitions.

Table 0-2: Safety precautions

Icon

Description

Before working on this equipment, be aware of good safety practices and the hazards involved
with electrical circuits.

To reduce risk of ﬁre hazard and electric shock, do not install the unit near a damp location.

To reduce the risk of ﬁre, use only number 26 AWG or larger UL Listed or CSA Certiﬁed
telecommunication line cord for all network and telecommunication connections.

•

Keep the product in a clean and dust-free location. Use only a soft, damp cloth to clean the product.

•

DO NOT expose the product to liquid or moisture.

•

DO NOT expose the product to extreme temperatures.

CAUTION

WARNING

Summary of Contents for Link Series






























































































































Search results

Summary of Contents for Link Series

Reviews:

Related manuals for Link Series

Brands by name

Popular brands

ICC Link Series, Web User Manual

Search results

Summary of Contents for Link Series

Reviews:

Related manuals for Link Series

Brands by name

Popular brands