manualshive.com logo in svg

ICC Link Series, Web User Manual

Share
Download
ICC Link Series Web User Manual Download Page 59

52

Wireless Web Interface User’s Manual

3. 

Click 

Modify

 to the right of the portal server of wlan_portal to modify the IP Address, Port, and Server Key. 

Note: The Server Name cannot be modified.

12.4 Free resource configuration

The 

Free Resource

 

Configuration

 is a walled garden function used to access the free resource in the 

Captive Portal 

module. Configuring 

this rule allows a specific client to access the specific network resource without portal authentication.

• 

Free Resource ID – free resource rule number, ranges from 1 to 32

• 

Source IP/Mask Length – source IP address field in the rule and the length of its mask

• 

Destination IP/Mask Length – destination IP address field in the rule and the length of its mask

Example:
1.  Type the Free Resource ID as 

1

, the Source IP/Mask Length as 

192.168.1.100/24

, and the Destination IP/Mask Length as 

10.1.1.1/32

. 

Click 

Add

 to complete the configuration.

2. 

Select the free resource rule  to be deleted, and click 

Delete

.

Summary of Contents for Link Series






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands