44
Wireless Web Interface User’s Manual
3. Enter the AP’s MAC address, for example,
f8-f7-d3-00-03-60
and click
Add
. Click
OK
.
4.
Select
Provisioning
from the left navigation bar to check the AP Provisioning status.
A static route may need to be created for the traffic to flow correctly across the NAT setup. Click
Wired Configuration
>
Route
Configuration> Static route configuration
.
Example: In this example the next hop IP address 192.168.1.2 is used based on the controller IP address of 192.168.1.1.
Type
0.0.0.0
in the Destination IP address field
, 0.0.0.0
in the Network mask or prefix-length field, and
192.168.1.2
in the
Nexthop or
Interface null0 field. Select Operation type
Add
and click
Apply
.
The AP will provision within 90 seconds. The status of the AP can be viewed in the Dashboard, or on the Provisioning page.
Click
Save Configuration
on the top of the page to save your configurations on the Link2000ACS.
