20
Wireless Web Interface User’s Manual
5.2.2 Static WEP authentication mode
Static WEP
sets the authentication mode as
security mode static-wep
. The WEP key is needed when connecting to the network. The
WEP authentication mode includes
open system
and
shared key
. The WEP key type includes
ASCII
and
HEX
. The length includes 64-bit
and 128-bit security.
Example: Select the Authentication as
Open System
, the WEP Key Type as
ASCII
, and the Length as
64
. Type the WEP Key as
12345
. The
figure is as follows:
5.2.3 WEP 802.1x
WEP 802.1x
sets the configuration as
security mode wep-dot1x
. This authentication mode needs the radius server’s WEP
authentication. To configure WEP 802.1x please refer to Chapter 7: Security authentication, Radius authentication server configuration.
Example: Type the Radius Authentication Server as
wlan1
, and type the Radius Accounting Server as
wlan2
. The Accounting Update
Interval, Bcast Key Refresh Rate, and Session Key Refresh Rate adopt the default WEP 802.1x authentication. Click
OK
. The figure is as
follows:
