100
Wireless Web Interface User’s Manual
2.
Trap manager configuration
Click
Management->SNMP Configuration->community managers
to configure the community string and the IP address that receives
the SNMP trap message.
•
Trap receiver – the IP address that receives the trap message
•
Community string (1 to 255 characters) – used to receive the trap message
•
Version –
1
,
2
or
3
•
Security level – If version is equal to 3;
noAuthNoPriv
,
authNoPriv
or
authPriv
•
Operation –
Add
or
Remove
Example: Type the Trap receiver as
192.168.1.100
Community string as
trap
. Click
Apply
to complete the configuration as follows:
21.2.4 Configure SNMP manager security IP
Click
Management->SNMP Configuration->configure snmp manager security IP
to configure the security IP that allows access to the
switch.
•
Security IP address – the security IP address of NMS
•
Operation –
Add
or
Remove
Example: Type the Security IP address as
192.168.1.10
and then click
Apply
to complete the configuration as follows:
