manualshive.com logo in svg

ICC Link Series, Web User Manual

Share
Download
ICC Link Series Web User Manual Download Page 23

16

Wireless Web Interface User’s Manual

Clear the 

Auto IP Assign Mode

 check box to disable the auto IP assign mode, and then type a static IP address manually. When 

configuring the static IP, the address of the existing loopback or L3 interfaces should be chosen; otherwise, it will not be effective, and the 
WLAN function will not function properly.

4.3 AP authentication mode

There are three modes of AP authentication. 

MAC

 is the default mode.

None

 sets the automatic registration authentication mode. The AP database does not need to be added manually on the Link2000ACS. It 

can join the cluster when the Link2000ACS or the AP automatically connects.

MAC

 sets the MAC address authentication mode. The AP database needs to be set manually, and then the AP can join the Link2000ACS.

Password

 sets the password authentication mode. After the TLS connection is created between the AP and the Link2000ACS, they can 

join the cluster through password authentication.

4.4 AP validation method

If 

MAC

 is selected for the AP authentication mode, the AP validation method can be configured. This option allows either local 

authentication or RADIUS server authentication for AP authentication. 

Local

 authentication is default. The authentication method can be 

changed to be RADIUS server authentication by selecting 

Radius

 from the 

AP Validation Method 

drop-down list.

Summary of Contents for Link Series






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands