15
Wireless Web Interface User’s Manual
Chapter 4: System configuration
Click
WLAN Configuration->System Configuration
to open the
System Configuration
page. From this page, the corresponding
parameters under WLAN global mode can be configured. The figure is as follows:
4.1 WLAN enable
Select
WLAN Enable
to enable the WLAN function. The Link2000ACS WLAN service can only be used after selecting this option. If it is
not selected, all WLAN functions on the Link2000ACS will be disabled, and WLAN service will be stopped.
Note: Default setting is WLAN disable.
Fast Configuration
will automatically update to WLAN enabled.
4.2 Auto IP assign mode
Select
Auto IP Assign Mode
, allowing the WLAN function to choose the IP address automatically.
When enabled, APs can have automatic IP address assignment from the Link2000ACS Wireless IP subnet. If the user has configured
multiple Layer-3 interfaces or loopback interfaces on the controller, select the WLAN IP address to be the lowest IP address among the
Layer-3 interface subnets or the lowest loopback interface.
