IBS MediaClave, User Manual

Page: 60 / 74

MediaClave overview
INTEGRA Biosciences
Page 54
7.4.5 General default values
7.5 Limitations and general notes
7.5.1 Overview
• When operating the MediaClave in the MEDIACLAVE program mode, always follow the recommen-
dations of the medium suppliers. Using non-specified values may influence the quality of the pre-
pared medium.
• To operate the MediaClave in the AUTOCLAVE program mode, special equipment (AUTOCLAVE kit)
must be ordered (see section 7.2.1).
Language: English
Printer: Progress print:
Print cycle:
Self-test: Table
1 minute
off
Communication: Device address:
Host Port 1
9600 Bd - 1S - 8D - NP - 1S
Unit of measure: Degrees Celsius
Contrast: 77%
Sterilisation: Mediaclave tolerance:
Autoclave tolerance: +/- 1.5°C
+/- 1.5°C
Ventilation: (Vent valve closing
temperature - it is open below)
MediaClave ventilation temp:
Autoclave ventilation temp: 100°C
105°C
Cooling: 1. Cooling temperature at
MediaClave program 15:
min. temp. of coupling medium:
45°C
35°C
Cleaning: Cleaning temperature: 80°C
Date: Day, Month, Year: Current date
Time: Hour, Minute: Current time
Info: - Software version
- Serial number
- Date, time
- Operating hours, Cycle
Dispensing time 240 minutes
Table 7.6: General default values
WARNING:
Do not use MediaClave to sterilise medical devices or laboratory instruments.