IBS MediaClave, User Manual

Page: 46 / 74

MediaClave overview
INTEGRA Biosciences
Page 40
5.3.3.2 Emptying the MediaClave
1. Open the safety cover and vessel lid
2. Press EMPTY on the CLEANING menu. The EMPTY menu appears and certain messages progres-
sively appear:
• VESSEL IS BEING EMPTIED
• PAUSE
• VESSEL IS BEING EMPTIED
• VESSEL EMPTIED
• WATER DRAIN MANUAL (The residual water can be expelled manually)
3. Press and hold MANUAL to manually expel residual water using the pump
4. Press END to finish the emptying program and return to the CLEANING menu
5. Press MAIN MENU to return to the start display
5.3.4 CLEAN menu
5.3.4.1 Overview
When cleaning, the enclosed heating water is first heated to 40–80°C (see section 3.4.4.2), held for 100
seconds and then expelled. Emptying occurs in the same manner as in the
EMPTY Menu (see section
5.3.3).
5.3.4.2 Cleaning the MediaClave
1. Open the safety cover and vessel lid
2. Press CLEAN on the CLEANING menu. Certain messages progressively appear:
• VESSEL IS BEING CLEANED
• PREPARE COOLING
• WATER CONTROL (The heating water level is checked)
NOTE:
The emptying duration depends on the volume of the vessel content.
NOTE:
The actual temperature is displayed in the upper right of the screen.
ATTENTION:
Ensure that there is sufficient heating water in the vessel throughout the CLEAN program.
NOTE:
The approximate cleaning duration is 10 minutes (this includes emptying). This may vary accord-
ing to temperature and the volume of the vessel contents.
NOTE:
Press END to cancel cleaning. The CLEANING menu appears.
NOTE:
The actual temperature is displayed in the upper right of the screen.