IBS MediaClave, User Manual

Page: 27 / 74

User Manual 3.4
INTEGRA Biosciences Page 21
ENGLISH
8. Press – or + to perform the self-test
9. Press SAVE to return to the PARAMETER ENTRY menu
COMMUNICATION
1. From the PARAMETER ENTRY menu, press CONTINUE to scroll to and select COMMUNICATION.
2. Press EDIT
3. The SET HOST ADDRESS menu displays two options:
•
DEVICE ADDRESS: [1–16]
• HOST-PORT: 9600B, 1S, 8D, NP, 1S
4. Press – or + to select the desired device address
5. Press SAVE to return to the PARAMETER ENTRY menu
UNITS OF MEASUREMENT
1. From the PARAMETER ENTRY menu, press CONTINUE to scroll to and select UNITS OF MEAS-
UREMENT
2. Press EDIT
3. The SET UNITS OF MEASUREMENT menu displays the following:
•
UNITS OF MEASUREMENT: [DEGREES CELSIUS / DEGREES FAHRENHEIT]
4. Press – or + to select the desired unit of measurement
5. Press SAVE to return to the PARAMETER ENTRY menu
CONTRAST
1. From the PARAMETER ENTRY menu, press CONTINUE to scroll to and select CONTRAST
2. Press EDIT
3. The SET CONTRAST menu appears
4. Press – or + to adjust the contrast to suit the working environment
5. Press SAVE to return to the PARAMETER ENTRY menu
STERILISATION
1. From the PARAMETER ENTRY menu, press CONTINUE to scroll to and select STERILISATION
2. Press EDIT . The STERILISATION PARAMETER menu appears
3. Press CONTINUE to choose MEDIACLAVE TOLERANCE or AUTOCLAVE TOLERANCE
4. Press – or + to adjust the sterilisation tolerance
5. Press SAVE to return to the PARAMETER ENTRY menu
NOTE:
A self-test is executed to check the functionality of the printer. When the self-test is initiated,
a test print is performed to check the functionality of the printer (see section 7.7).
NOTE:
A MediaClave device address can be selected from positions 1 to 16.
NOTE:
The contrast of the LCD can be adjusted between 0% and 100% to allow viewing in different light-
ing conditions.
NOTE:
The sterilisation tolerance can be adjusted between ±0.5°C and ±3.0°C. (default: ±1.5°C.)