IBS MediaClave, User Manual

Page: 40 / 74

MediaClave overview
INTEGRA Biosciences
Page 34
• HEATING UP
• STERILISING
• COOLING
• STERILISATION CONCLUDED
4.3.3 WATERBATH program operation
4.3.3.1 Overview
The flow of the WATER BATH cycle is as follows:
System Check
→
Heating
→
WATER BATH
4.3.3.2 System check
All instrument functions and corresponding sensors are initialised and checked during a system check.
4.3.3.3 Heating
The heating phase brings the water bath temperature to the programmed target value.
Figure 4.3 illustrates the progress of the WATER BATH cycle as displayed on the WATER BATH PROG
[#] screen
.
Figure 4.3: The WATER BATH PROG [#] screen
NOTE:
The actual and target temperatures are displayed in the upper right of the screen. The target
temperature must be reached in order for the cycle to progress.
NOTE:
The actual sterilisation temperature and countdown timer are displayed in the upper right of
the screen. The sterilisation time is counted down in minutes and seconds.
NOTE:
The actual and target cooling temperatures are displayed in the upper right of the screen.
NOTE:
The safety cover opens after pressing the END button. The cycle ends.