IBS MediaClave, User Manual

Page: 26 / 74

MediaClave overview
INTEGRA Biosciences
Page 20
3.3.4 PARAMETER menu
Instrument adjustments can be viewed or modified in the PARAMETER menu.
3.3.4.1 Accessing the PARAMETER menu
1. Press PARAMETER on the start display. The PARAMETER ENTRY menu appears and displays 11
menu options:
•
PRINTER
• COMMUNICATION
• UNITS OF MEASUREMENT
• CONTRAST
• STERILISATION
• VENTILATION
• COOLING
• CLEANING
• DATE
• TIME
• INFO
2. Press CONTINUE to scroll to and select the desired menu option
3. Press EDIT to modify the required option
4. Press MAIN MENU to return to the start display
3.3.4.2 Adjusting parameters
PRINTER
1. From the PARAMETER ENTRY menu, press CONTINUE to scroll to and select PRINTER
2. Press EDIT . The SET UP PRINTER menu displays three options:
• PROGRESS PRINTOUT
• PRINT CYCLE
• SELF TEST
3. Press CONTINUE to scroll to and select PROGRESS PRINTOUT
4. Press – or + to select one of the following:
•
TABLE
• OFF
5. Press CONTINUE to select PRINT CYCLE. (10,20..50s; 1,2..10min; default: 1min)
6. Press – or + to adjust the print cycle duration
7. Press CONTINUE to select SELF TEST
NOTE:
All instrument data is stored in NVRAM (Non-Volatile Random Access Memory). NVRAM retains
all memory even when the power to the instrument is switched off. A battery automatically takes over and
all modifications and instrument data are saved. For the default values see section 7.4
NOTE:
TABLE results in a progress printout every x minutes; when the progress printout is switched
off by selecting OFF, there is no printout.
NOTE:
The print cycle duration can be adjusted between 10 seconds and 10 minutes. A two-minute
print cycle is recommended. This means that during a program cycle, a progress printout is printed
every two minutes. See section 7.7 for a detailed analysis of progress printouts.