IBM xSeries 440 8687, Hardware Maintenance Manual

Page: 197 / 258

Error code/symptom FRU/action
00019503 (Processor 3 is not functioning -
check VRM and processor LEDs)
1. VRM 3
2. Microprocessor 3
3. SMP board
00019504 (Processor 4 is not functioning -
check VRM and processor LEDs)
1. VRM 4
2. Microprocessor 4
3. SMP board
00019701 (Processor 1 failed BIST)
1. Microprocessor 1
2. VRM1
3. SMP board
00019702 (Processor 2 failed BIST)
1. Microprocessor 2
2. VRM2
3. SMP board
00019703 (Processor 3 failed BIST)
1. Microprocessor 3
2. VRM3
3. SMP board
00019704 (Processor 4 failed BIST)
1. Microprocessor 4
2. VRM4
3. SMP board
00180100 (A PCI adapter has requested
memory resources that are not available)
1. Reorder the adapters in the PCI slots. It is important that
your boot device is positioned early in the scan order so that
it is executed by POST.
2. Ensure that the PCI adapter and all other adapters are set
correctly in the Configuration/Setup Utility program. If the memory
resource settings are not correct, change the settings.
3. If all memory resources are being used, you might need to
remove an adapter to make memory available to the PCI adapter.
Disabling the adapter BIOS on the adapter should correct the
error. Refer to documentation provided with the adapter.
00180200 (No more I/O space available for
PCI adapter)
1. Run Configuration/Setup.
2. Failing adapter.
3. PCI-X board.
00180300 (No more memory (above 1MB for
PCI adapter))
1. Run Configuration/Setup.
2. Failing adapter.
3. PCI-X board.
00180400 (No more memory (below 1MB for
PCI adapter))
1. Run Configuration/Setup.
2. Move the failing adapter to slot 1 or 2.
3. Failing adapter.
4. PCI-X board.
00180500 (PCI option ROM checksum error)
1. Remove failing PCI card.
2. PCI-X board.
00180600 (PCI built-in self test failure)
1. Run Configuration/Setup.
2. Move the failing adapter to slot 1 or 2.
3. Failing adapter.
4. PCI-X board.
Symptom-to-FRU index
185