IBM xSeries 440 8687, Hardware Maintenance Manual

Page: 165 / 258

Beep/symptom FRU/action
2-2-3 (CMOS power failure and
checksum checks have failed)
1. Battery
2. I/O board
2-2-4 (CMOS configuration information
validation has failed)
1. Battery
2. I/O board
2-3-1 (Screen initialization has failed)
1. Restart server.
2. Monitor.
3. I/O board.
2-3-2 (Screen memory test has failed)
v I/O board
2-3-3 (Screen retrace tests have failed)
1. Monitor
2. I/O board
2-3-4 (Search for video ROM has failed)
v I/O board
2-4-1 (Screen test indicates the screen is
operable)
v Information only
3-1-1 (Timer tick interrupt failed)
v I/O board
3-1-2 (Interval timer channel 2 failed)
v I/O board
3-1-3 (RAM test has failed above
address hex 0FFFF)
1. DIMM
2. SMP board
3-1-4 (Time-of-Day clock failed)
1. Battery
2. I/O board
3-2-1 (Serial port test has failed.)
1. I/O board
2. Centerplane
3-2-2 (Parallel port test has failed)
v I/O board
3-2-4 (Comparison of CMOS memory
size against actual has failed)
1. Battery
2. I/O board
3-3-1 (A memory size mismatch has
occurred)
1. DIMM
2. SMP board
3-3-2 (Critical SMBUS error occurred)
1. Disconnect power cord, wait 30 seconds, retry .
2. DIMM.
3. SMP board.
4. I/O board.
3-3-3 (No operational memory in system)
1. Install or reseat DIMMS, then reboot.
2. DIMM.
3. SMP board.
4. I/O board.
3-3-4 (ECC hardware test failed)
1. DIMM
2. SMP board
Two short beeps (information only,
configuration has changed)
1. Run Configuration/Setup.
2. Run diagnostics.
Symptom-to-FRU index
153