IBM xSeries 230 61Y, Hardware Maintenance Manual

Page: 59 / 194

3. Press down on the flange while pressing out on the door; then, lift the server
door up and off the hinge. Set the door aside in a safe place.
Removing the bezel (rack or tower)
1
Bezel-release lever
2
Bezel
To remove the bezel:
1. Move the blue bezel-release lever, following the curve of the lever opening.
Note: The illustration shows a rack model.
2.
Lift the bezel tabs out of the slots and pull the bezel away from the server
front. Store the bezel in a safe place.
Working with adapters
You can install up to five peripheral component interconnect (PCI) adapters in the
expansion connectors, called slots, on the system board of your server.
Your server comes with an integrated video controller, which is a component on
the system board. When you install a video adapter, the server BIOS automatically
disables the integrated video controller.
The following illustration shows the location of the 33 MHz PCI expansion slots on
the system board.
Installing options
51