IBM xSeries 230 61Y, Hardware Maintenance Manual

Page: 77 / 194

CAUTION:
The following label indicates a hot surface nearby.
b. Remove the defective power supply by placing the handle of the power
supply in the open position (perpendicular to the power supply) and
pulling the power supply from the bay.
3.
Install a replacement power supply:
a. Place the handle on the replacement power supply in the open position;
then, slide the power supply into the chassis.
b. Gently close the handle on the power supply to seat the power supply in
the bay.
c. Plug the power cord for the power supply into the power cord connector.
d. Verify that the AC Power light and DC Power light are lit, indicating that
the power supply is operating correctly.
4.
Turn on the server and peripheral devices.
5. If you have other options to install or remove, do so now; otherwise, go to
“Installing the cover” on page 70.
Replacing a fan assembly
Your server comes with two fan assemblies.
Attention: Replace a fan that has failed within 48 hours to help ensure proper
cooling.
The following illustration shows the replacement of a fan assembly.
1
Fan assembly
2
Fan assembly latch
Installing options
69