IBM xSeries 230 61Y, Hardware Maintenance Manual

Page: 11 / 194

General information
Your IBM
®
xSeries 230 is a high-performance, symmetric multiprocessing
(SMP) server. It is ideally suited for networking environments that require superior
microprocessor performance, efficient memory management, flexibility, and large
amounts of reliable data storage.
Your xSeries 230 comes with a three-year limited warranty and IBM PC Server
90-Day Start Up Support. If you have access to the World Wide Web, you can
obtain up-to-date information about your xSeries 230 model and other IBM server
products at the following World Wide Web address:
http://www.ibm.com/pc/support
Your server serial number and model number are located on labels on the rear of
the server and on the front under the trim bezel. You will need these numbers
when you register your server with IBM. To register your server, go to the
following World Wide Web address:
http://www.ibm.com/pc/register
To find the meanings of various computer-related terms, you can access the IBM
xSeries 230 at the following World Wide Web address:
http://www.networking.ibm.com/nsg/nsgmain.htm
Features and specifications
The following table provides a summary of the features and specifications for your
xSeries 230 server.
Microprocessor:
v
Intel
®
Pentium III microprocessor with MMX technology and SIMD extensions
v
256 KB Level-2 cache (min.)
v
Supports up to two microprocessors
Memory:
v
Standard: 128 MB
v
Maximum: 4GB
v
Type: 133 MHz, ECC, SDRAM, Registered DIMMs
v
Sockets: 4 dual inline sockets
Drives standard:
v
Diskette: 1.44 MB
v CD-ROM: 40X IDE
Expansion bays:
v Hot-swap: 6 slim high or 3 half high
v
Non-hot-swap: Three 5.25-inch (one used by CD-ROM drive)
PCI expansion slots:
v
Three 33 MHz/ 64-bit slots
v
Two 33 MHz/ 32-bit slots
Power supplies: 250 W (115-230 Vac)
© Copyright IBM Corp. 2000
3