IBM xSeries 230 61Y, Hardware Maintenance Manual

Page: 79 / 194

Installing the bezel and front door
1
Bezel
2
Server door
3
Flange
To install the bezel:
1. Place the tabs at the bottom edge of the bezel in the slots at the bottom front of
the server.
2. Press the top of the bezel toward the server until the bezel clicks into place.
To install the server door:
1. Set the door on the bottom hinge.
2. Press the flange downward while pressing the top of the door toward the
server, until the flange connects with the top hinge. Then, release the flange.
3.
Close and lock the server door.
Attention: Be sure to maintain a clearance of at least 127 mm (5 inches) on
the front and rear of the server to allow for air circulation.
Installing the cover (rack)
Installing options
71