IBM xSeries 230 61Y, Hardware Maintenance Manual

Page: 147 / 194

Error Code/Symptom FRU/Action
00180500 (PCI option ROM checksum error)
1. Remove Failing PCI Card
2. System Board
00180600
(PCI built-in self test failure) PCI to
PCI Bridge error
1. Run Configuration/Setup
2. Move the failing adapter to slot 1 or 2
3. Failing Adapter
4. System Board
00180700, 00180800 (General PCI error)
1. System Board
2. PCI Card
01295085 (ECC checking hardware test error)
1. System Board
2. Processor
01298001 (No update data for processor 1)
1. Ensure all processors are the same cache size.
2. Processor 1
01298002 (No update data for processor 2)
1. Ensure all processors are the same cache size.
2.
Processor 2
01298101 (Bad update data for processor 1)
1. Ensure all processors are the same cache size.
2. Processor 1
01298102 (Bad update data for processor 2)
1. Ensure all processors are the same cache size.
2. Processor 2
I9990301 (Fixed boot sector error)
1. Hard Disk Drive
2. SCSI Backplane
3. Cable
4.
System Board
I9990305
(Fixed boot sector error, no
operating system installed)
1. Install operating system to hard disk drive.
I9990650 (AC power has been restored)
1.
Check cable
2. Check for interruption of power supply
3. Power Cable
Symptom-to-FRU index
139