IBM TS3400, Maintenance Information

Page: 128 / 295

6-22
TS3400 Tape Library Maintenance Information
Do not connect the other end of the cable to the customer’s fibre fabric or host
HBA. The customer will attach the other end of the cable during the
configuration of the library.
2. Connect the network Ethernet cable to the Ethernet port on the rear of the
Library Control Blade (see Figure 6-24). If the Ethernet connection will be directly
attached to a server or PC by the customer during configuration of the library, a
crossover cable may be required.
Figure 6-24. Ethernet cable
Configuring the Library
The customer is responsible for configuring the library and the drives, including
encryption, partitions, and other configuration settings. Refer the customer to the
configuration instructions in the
IBM System Storage TS3400 Tape Library Planning and
Operator Guide .
Note: If this library is attached to an IBM System Storage TS1120 Tape Controller,
refer to the IBM System Storage TS1120 Tape Controller Maintenance
Information section titled 3592 C06 Controller Attached to 3577 L5U Library
for direction on configuring the TS3400 Tape Library for that environment.
a34z0142