IBM TS3400 Maintenance Information Download

Page: 89 / 295

Chapter 4. Operator Panel and Web User Interface

4-5

After launching the Web User Interface, the login window is displayed.

Figure 4-7. Login window

The factory default account passwords are:
• User account:

user

, Password:

user

• Superuser account:

suser

, Password:

suser

• Administrator User account:

admin

, Password:

secure

• Service User account:

service

, Password: (Contact your next level of support)

After entering your Account name and Password, use your mouse to click Login or
press the Enter key.

For information on Administrator, Service, and User account privileges, see “User
Privileges” on page 4-6.

Common Header Elements

All Web User Interface windows (except for the Login screen) contain the following
common elements in the header:
•

Help

— Click to read context-sensitive help for the associated page.

•

Logoff

— Click to log out of the Web User Interface.

a34z0095

Summary of Contents for TS3400








































































































































































































































































































Search results

Summary of Contents for TS3400

Reviews:

Related manuals for TS3400

Brands by name

Popular brands

IBM TS3400, Maintenance Information

Search results

Summary of Contents for TS3400

Reviews:

Related manuals for TS3400

Brands by name

Popular brands