IBM TS3400 Maintenance Information Download

Page: 122 / 295

6-16

TS3400 Tape Library Maintenance Information

Placing the Library in the Rack

The library slides into position on the rack shelf and is secured in position by screws
through the mounting brackets.

Before proceeding with the installation of the library, ensure that you have removed
all the library components by following the procedures in “Removing Components to
Reduce Library Weight” on page 6-2.

Figure 6-17. Sliding library into the rack

To place the library in the rack:

With a person on each side of the library, lift the library.

Slide the library partially onto the rail shelves in the rack.

Push the library into the rack until the mounting bracket contacts the front
vertical rail posts.

Insert and tighten the thumb screws on the mounting brackets ( in Figure 6-18)
into the front vertical rail posts.

Finally, push the clip-on bezels ( in Figure 6-18) into the retainers on the
mounting brackets to complete the rack installation.

a34z0037

Summary of Contents for TS3400








































































































































































































































































































Search results

Summary of Contents for TS3400

Reviews:

Related manuals for TS3400

Brands by name

Popular brands

IBM TS3400, Maintenance Information

Search results

Summary of Contents for TS3400

Reviews:

Related manuals for TS3400

Brands by name

Popular brands