IBM TS3400 Maintenance Information Download

Page: 28 / 295

1-12

TS3400 Tape Library Maintenance Information

00B0

Failed to detect cartridge
in the Accessor at
completion of GET (eject
cartridge) operation.

CHK 00B0

Confirm the media is compatible.

Cycle the power and try again.

Replace the Library Control Blade (page 9-8).

Replace the Accessor assembly (page 9-23).

Replace the Accessor Flat Cable Plate assembly (page 9-28).

Replace the Back Board assembly (page 9-37).

Replace the TS3400 Tape Library chassis (page 9-44).

00B1

No cartridge is contained
in the specified cell (Cell
Empty).

CHK 00B1

00B2

Cartridge was detected in
the Accessor at
completion of
CTRG.CHECK (check
cartridge) operation.

CHK 00B2

00B3

Cartridge was detected in
the Accessor at
completion of PUT (store
cartridge) operation.

CHK 00B3

00B8

Accessor error #1.
An error was detected
when moving the RVS
position (PP1). Accessor
origin not detected or
FWD detected.

CHK 00B8

Cycle the power and try again.

Replace the Library Control Blade (page 9-8).

Replace the Accessor assembly (page 9-23).

Replace the Accessor Flat Cable Plate assembly (page 9-28).

Replace the Back Board assembly (page 9-37).

Replace the TS3400 Tape Library chassis (page 9-44).

00B9

Accessor error #2.
An error was detected
when moving the FWD
position (PP2). Accessor
origin detected or FWD
not detected.

CHK 00B9

00BA

Accessor error #3.
An error was detected
when moving the
cartridge push/pull
position (PP4/PP5).
Accessor origin or FWD
detected, or Cell Full.

CHK 00BA

00BC

During initialization, the
Accessor origin could not
be detected.

CHK 00BC

00BE

Accessor error #4.
The specified number of
edges could not be
detected when moving the
Accessor.

CHK 00BE

Cycle the power and try again.

Replace the Library Control Blade (page 9-8).

Replace the Accessor assembly (page 9-23).

Replace the Accessor Flat Cable Plate assembly (page 9-28).

Replace the Back Board assembly (page 9-37).

Replace the TS3400 Tape Library chassis (page 9-44).

Table 1-1. Library error codes (continued)

Code (H)

Description

Panel

Indication

Action Required

Summary of Contents for TS3400








































































































































































































































































































Search results

Summary of Contents for TS3400

Reviews:

Related manuals for TS3400

Brands by name

Popular brands

IBM TS3400, Maintenance Information

Search results

Summary of Contents for TS3400

Reviews:

Related manuals for TS3400

Brands by name

Popular brands