IBM ThinkPad R30, Operator'S Manual

Page: 253 / 276

Operator Panel Display Numbers
E-5
260
Information is being displayed on the display console.
261
No supported local system display adapter was found.
262
Keyboard not detected as being connected to the system’s keyboard port.
263
Attempting a Normal mode IPL from adapter feature ROM specified in the
NVRAM Device List.
269
Stalled state - the system is unable to IPL.
271
Mouse and Mouse port POST.
272
Tablet Port POST.
277
Auto Token-Ring LANstreamer MC 32 Adapter
278
Video ROM scan POST.
279
FDDI POST.
280
3com Ethernet POST.
281
Keyboard POST executing.
282
Parallel port POST executing.
283
Serial port POST executing.
284 POWER Gt1
graphics adapter POST executing.
285 POWER Gt3
graphics adapter POST executing.
286
Token-Ring adapter POST executing.
287
Ethernet adapter POST executing.
288
Adapter card slots being queried.
289
POWER GT0 Display Adapter POST.
290
IOCC POST error (irrecoverable).
291
Standard I/O POST running.
292
SCSI POST running.
293
7012 DBA disk POST running.
294
IOCC bad TCW SIMM in slot location J being tested.
295
Graphics Display adapter POST, color or grayscale.
296
ROM scan POST.
297
System model number does not compare between OCS and ROS
(irrecoverable).
298
Attempting a software IPL.
299
IPL ROM passed control to the loaded program code.
301
Flash Utility ROM test failed or checkstop occurred (irrecoverable).
302
Flash Utility ROM: User prompt, move the key to the service position in
order to perform an optional Flash Update. LED
302
only appears if the key
switch is in the secure position. This signals the user that a Flash Update
may be initiated by moving the key switch to the service position. If the key
is moved to the service position then LED
303
is displayed, this signals the
user to press the reset button and select optional Flash Update.
303
Flash Utility ROM: User prompt, press the reset button in order to perform
an optional Flash Update. LED
302
only appears if the key switch is in the
secure position. This signals the user that a Flash Update may be initiated
by moving the key switch to the service position. If the key is moved to the
service position LED
303
is displayed, this signals the user to press the
reset button and select optional Flash Update.
304
Flash Utility ROM IOCC POST error (irrecoverable).
305
Flash Utility ROM standard I/O POST running.
306
Flash Utility ROM is attempting IPL from Flash Update media device.
307
Flash Utility ROM system model number does not compare between OCS
and ROM (irrecoverable).
308
Flash Utility ROM: IOCC TCW memory is being tested.
309
Flash Utility ROM passed control to a Flash Update Boot Image.
311
Flash Utility ROM CRC comparison error (irrecoverable).