IBM ThinkPad R30, Operator'S Manual

Page: 232 / 276

B-2
Operator Guide
Flag, Parameter and Keyword Default Values
Name Default Value
BUMP Console Power-On Command String Power
Service Console Power-On Command String Blank (not set)
BUMP Console Power-On Command flag Enabled
Service Console Power-On Command flag Disabled
Remote Authorization flag Disabled
Autoservice IPL flag Disabled
BUMP Console Present flag Enabled
BUMP Console Speed 1200
Dial-Out Authorization flag Disabled
Set Electronic Mode Switch to Normal when
Booting flag NRM
Electronic Mode Switch from Service Line flag Disabled
Boot Multiuser AIX in Service flag Disabled
Fast IPL flag Disabled
Power-On Tests in Loop Mode flag Disabled
Power-On Tests in Trace Mode flag Disabled
Power-On Test Message Mode parameter 1 (verbose mode off: only error messages
shown)
Extended Tests parameter Disabled
Maintenance Password Blank (no password set)
Customer Maintenance Password Blank (no password set)
System Dial-In phone number Blank (not set)
Service Center Dial-Out phone number Blank (not set)
Customer Hub Dial-Out phone number Blank (not set)
System Operator Voice phone number Blank (not set)
Modem Parameters File Name Blank
Service Line Speed 1200
Protocol Inter Data Bloc Delay 15
Protocol Time Out 30
Retry Number 2
Customer ID Blank
Login ID Blank
Password ID Blank
Service Contract Validity Enabled
Remote Service Support Enabled
Quick On-Call Service N
Service Support Type F (ASCII byte x’46’)