IBM ThinkPad R30, Operator'S Manual

Page: 142 / 276

4-20
Operator Guide
Pair Description Value
S1
S2
S3 Serial port 1 connector.
Serial port 2 connector.
Serial Port 3 connector.
11
12
13
14
21
22
23
24
Remote async node 1 on line 1.
Remote async node 2 on line 1.
Remote async node 3 on line 1.
Remote async node 4 on line 1.
Remote async node 1 on line 2.
Remote async node 2 on line 2.
Remote async node 3 on line 2.
Remote async node 4 on line 2.
GH
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
Memory module in location 1 on the memory card.
Memory module in location 2 on the memory card.
Memory module in location 3 on the memory card.
Memory module in location 4 on the memory card.
Memory module in location 5 on the memory card.
Memory module in location 6 on the memory card.
Memory module in location 7 on the memory card.
Memory module in location 8 on the memory card.
Memory module in location 9 on the memory card.
Memory module in location 10 on the memory card.
Memory module in location 11 on the memory card.
Memory module in location 12 on the memory card.
Memory module in location 13 on the memory card.
Memory module in location 14 on the memory card.
Memory module in location 15 on the memory card.
Memory module in location 16 on the memory card.
G,HHH
00
For devices other than those listed here
00
thru
15
Port addresses for 8-port async, 16-port async, and 16-port
concentrator distribution boxes.
01
Diskette drive 1
0,000
thru
F,255
SCSI address and logical unit number of the device shown in
decimal.
Note: When a comma appears between the G and H, digits
appearing to the right of the comma are represented in decimal.
Note: See the Appendix A to determine physical location.