IBM ThinkPad 755CX Manual Download Page 79

Page: 79 / 296

Using PC Cards

Understanding the Meaning of Icons

The PC Card Director uses various icons to show you the status of
the PCMCIA slots and the type of PC Card installed.

A Help button is available on most PC Card Director menu screens.
To obtain additional information for each screen, click on this button.

Status Icons

Icon

DOS Message

Meaning

Empty

No PC Card is installed in the
slot.

—

A PC Card is installed.

Ready

The PC Card in the slot is ready
to be used.

Not Ready

The PC Card is not ready and
cannot be used.

Non Removal

The PC Card cannot be removed.

Chapter 3. Operating Your Computer

Summary of Contents for ThinkPad 755CX









































































































































































































































































































Search results

Summary of Contents for ThinkPad 755CX

Reviews:

Related manuals for ThinkPad 755CX

Brands by name

Popular brands

IBM ThinkPad 755CX, Manual

Search results

Summary of Contents for ThinkPad 755CX

Reviews:

Related manuals for ThinkPad 755CX

Brands by name

Popular brands