IBM System x3650 M4 BD Type 5466, Installation And Service Manual

Page: 225 / 786

5. Rotate the hot-swap rear hard disk drive cage down (see “Rotating the
hot-swap rear hard disk drive cage down” on page 169.
6. Install the server top cover (see “Replacing the server top cover” on page 260.
7. Reconnect the external cables; then, reconnect the power cords and turn on the
peripheral devices and the server.
Removing the system battery
Use this information to remove the system battery.
About this task
The following notes describe information that you must consider when replacing
the battery:
v
IBM has designed this product with your safety in mind. The lithium battery
must be handled correctly to avoid possible danger. If you replace the battery,
you must adhere to the following instructions.
Note:
In the U. S., call 1-800-IBM-4333 for information about battery disposal.
v
If you replace the original lithium battery with a heavy-metal battery or a
battery with heavy-metal components, be aware of the following environmental
consideration. Batteries and accumulators that contain heavy metals must not be
disposed of with normal domestic waste. They will be taken back free of charge
by the manufacturer, distributor, or representative, to be recycled or disposed of
in a proper manner.
v
To order replacement batteries, call 1-800-IBM-SERV within the United States,
and 1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and
Canada, call your support center or business partner.
Note: After you replace the battery, you must reconfigure the server and reset
the system date and time.
Statement 2
Figure 121. PCI riser-card assembly 2 installation
Chapter 6. Removing and replacing components
209