IBM System storage DS6000 Series, Redbooks

Page: 235 / 406

Chapter 10. DS CLI
211
Figure 10-7 Using the GUI to get the contents of a FlashCopy task
It makes more sense, however, to use the ESS CLI show task command to list the contents of
the tasks, as depicted in Example 10-13.
Example 10-13 Using the command line to get the contents of a FlashCopy task
mitchell@aixserv:/opt/ibm/ESScli > esscli show task -s 10.0.0.1 -u csadmin -p passw0rd -d
"name=Flash10041005"
Wed Nov 24 10:37:17 EST 2004 IBM ESSCLI 2.4.0
Taskname=Flash10041005
Tasktype=FCEstablish
Options=NoBackgroundCopy
SourceServer=2105.23953
TargetServer=2105.23953
SourceVol TargetVol
------------------------------------------------------------------------
1004 1005
10.10.3 Converting the saved task to a DS CLI command
Having collected the contents of a saved task, it can now be converted into a DS CLI task.
Using the data from Example 10-13, each parameter is translated to the correct value for a
DS CLI command in Table 10-3.