IBM System storage DS6000 Series, Redbooks

Page: 215 / 406

Chapter 9. The DS Storage Manager: Logical configuration
191
12.Under the Define alias assignments panel, do the following:
a. Click the check box next to the LCU number.
b. Enter the starting address.
c. Select the order of Ascending or Descending.
d. Select the aliases per volumes. For example, 1 alias to every 4 base volumes, or 2
aliases to every 1 base volume.
e. Click Next.
13.Under the Verification panel, click Finish.
9.3.12 Using the Express Configuration Wizard
After you have created and defined the storage complex, unit, arrays, ranks, and extent
pools, you can use the Express Configuration Wizard to create FB or CKD volumes. Under
Configure
Storage do the following:
1. Click Express Configuration Wizard.
2. Select the storage unit and volume type and click Next.
3. Fill out the appropriate information as shown in Figure 9-49.
Figure 9-49 View of the Open System Express volume creation
4. Continue to follow the menu prompts.