IBM SAN04M-R, Installation And Service Manual, Page: 63 / 96

39 Chapter 3: Maintenance and troubleshooting
4. Click
Download
.When you download a new version, it is always
saved in the inactive location.
i2640010
Figure 9 Firmware upgrade dialog box
Activate new firmware
To activate the new firmware:
1. Click
Activate
. The
Activate Boot Location
dialog displays both
firmware locations and their respective build dates.
2. Click on the version you want to activate.
3. Click
OK
.
4. Choose
Reset Switch
from the
File
menu to make the new
version active. When the reset is finished, the newest version
becomes active and the prior version is saved as inactive.
5. If there are unsaved changes, the
Save Configuration to Flash
dialog box displays. If so, do step 5; if not, go to step 6.
6. Click
Save and Reset
. After the reset, a version mismatch
message displays. You must now exit the Element Manager.
7. Click
Yes
to exit the Element Manager.