IBM SAN04M-R, Installation And Service Manual, Page: 55 / 96

31 Chapter 2: Installing and connecting the SAN Router
SAN Router firmware default values
If you need to restore the default values in the firmware, review
Table 14 as the table lists all default values and how you can change
or view the default values from Element Manager or SANvergence
Manager.
.
Table 14
SAN Router firmware default values for Element Manager
Element Manager parameters Default setting Element Manager menu hierarchy
System
R-Port Routing Cluster ID 1 Configuration>System>Operations
Router Inband IP address 192.168.110.100 Configuration>System>Inband Address
Router Subnet mask 255.255.255.0 Configuration>System>Inband Address
Default Gateway address 0.0.0.0 Configuration>System>Inband Address
SNMP Read-only Password public Configuration>System>SNMP
Communities/Hosts
SNMP Read-modify Password private Configuration>System>SNMP
Communities/Hosts
SNMP hosts None defined Configuration>System>SNMP
Communities/Hosts
SNMP Traps None defined Configuration>System>SNMP Traps
New Device Zoning Not a member of any
zone Configuration>System>New Device Zoning
Element Manager Poll Interval (in secs) 30 Options>Poll Interval
10/100 BaseT management port
Management Port IP address (See note that
follows this table.) 0.0.0.0 Configuration>Port>Management
Management Port Subnet Mask 0.0.0.0 Configuration>Port>Management
Default Gateway 0.0.0.0 Configuration>Port>Management
Multi-function Ports