IBM SAN04M-R, Installation And Service Manual, Page: 42 / 96

SAN04M-R SAN Router Installation And Service Manual 18
Task 5: Connecting the VT100 or emulation terminal to the
RS-232 management port
To connect the terminal:
1. Use a null modem cable to connect a VT100 terminal or any
standard PC running terminal emulation software to the RS-232
serial port on the SAN Router.
• Connect female end of cable to the RS-232 port on the SAN
Router. See Figure 3,
Management port to management terminal
connection
.
• Connect the male end of the cable to the RS-232 port on the
terminal. See Figure 3,
Management port to management terminal
connection
.
Intelligent Port Type iFCP
E_Port Zone Policy Append router zones
E_Port Connection Mode Open Fabric 1.0
Compression Off
MTU Auto
Auto Reset on Severe Errors Enabled
Fast Write Off
Serial Port 9600, 8, none,1, none
Table 8
Other SAN Router defaults (Continued)
Parameter Default Setting