IBM SAN04M-R, Installation And Service Manual, Page: 43 / 96

i04MR003
1
2
19 Chapter 2: Installing and connecting the SAN Router
Figure 3
Management port to management terminal connection
Location Description
1 Connect null modem cable here. Connect other end
to VT100 or emulation terminal. Set the 10/100
Ethernet out-of-band management address from
here. (This connection does not require an IP
address.)
2 Connect this port to the external WAN/MAN/LAN
Network router using a standard RJ45 CAT 5 cable.
Access the Element Manager through an Internet
browser. (This connection requires an IP address.)
2. Set the PC terminal emulator settings to the SAN Router default
settings as shown in Table 9 .
Table 9
Terminal emulator settings
Parameter Setting
Bits per second 9600
Data bits 8
Parity bits None
Stop bits 1
Flow Control None