IBM RS/6000 SP, Problem Determination Manual

Page: 78 / 316

This soft copy for use by IBM employees only.
room for eight 2.5 MB images or a total of 20 MB. However, once the
images have been created, you only need psspspot.rs6k.ent. The other
images could be deleted. Accordingly, one may say that you only need one
file of 2.5 MB.
3. There should be at least 1 M B of free space in /tmp.
4. List the lppsource resource to see if it is available.
# lsnim -l lppsource
lppsource:
class = resources
type = lpp_source
server = master
location = /spdata/sys1/install/lppsource
alloc_count = 0
Rstate
= ready for use
prev_state = unavailable for use
simages = yes
The Rstate is ready for use and the simages is yes.
If the
simages
attribute is no, then the required images for the support images
needed to create the SPOT were not available in the lppsource resource.
The required images needed for the SPOT creation are listed in the
REQUIRED_SIMAGES variable in the file
/usr/lpp/bos.sysmgt/nim/methods/c_sh_lib.
REQUIRED_SIMAGES=
″
\
bos \
bos.net \
bos.rte.up \
bos.rte.mp \
bos.diag \
bos.sysmgt \
bos.terminfo \
bos.terminfo.all.data \
devices.base.all \
devices.buc.all \
devices.graphics.all \
devices.mca.all \
devices.scsi.all \
devices.sio.all \
devices.sys.all \
devices.tty.all
″
Before you run
setup_server
, again it may be necessary to remove the
incomplete created psspspot.
# nim -o remove psspspot
2.9.2.3 mksysb Creation Fails
58
SP PD Guide