IBM RS/6000 SP, Problem Determination Manual

Page: 53 / 316

This soft copy for use by IBM employees only.
This result indicates that the ssp.basic option is installed.
• If the verification in the previous step succeeds, then check your PATH
environment variable. You can achieve this by using echo $PATH.
−
Add /usr/lpp/ssp/bin to your PATH or use the full path name with the
command.
2.5.2 Problems Accessing Pulldown Menus of spmon
On the Control Workstation, if you run
spmon -g
in order to get the graphic
interface of
spmon
, and the numlock key is on, then you will not be able to access
any menu in
spmon
by clicking on Files or SP with the mouse. If numlock is off,
spmon
works without any problem. When you experience this problem with
spmon
with numlock on, you can still access the mwm root menu and aixterms window
menus. This problem is reported under IX50314. This problem was tested on
the ssp.gui.2.1.0.6 level.
2.5.3 System Monitor Displays Blanks Instead of the Expected Information
If the system monitor panels are displaying blanks instead of the expected
information after installation, or if the ControllerResponds indicator on the
system monitor frame environment panel is red, or if the
/var/adm/SPlogs/SPdaemon.log reports that the Frame Controller is not
responding, then do the following:
• Verify PSSP Installation.
Run verification tests to ensure that installation is complete. You can
achieve this using
smit or from the command line. Use smit as follows:
# smit sman_verify
or, from the command line, enter the following:
# /usr/lpp/ssp/bin/SYSMAN_test
HOST: sp2cw0
------------
SYSMAN_test: Verification succeeded
SYSMAN_test: Executing test on all active nodes
HOST: sp2n01
------------
SYSMAN_test: Verification succeeded
HOST: sp2n02
------------
SYSMAN_test: Verification succeeded
HOST: sp2n03
------------
SYSMAN_test: Verification succeeded
. .
. .
. .
HOST: sp2n13
------------
SYSMAN_test: Verification succeeded
HOST: sp2n14
------------
SYSMAN_test: Verification succeeded
SYSMAN_test: The number of nodes that were not tested is 4
This output confirms that your installation is complete.
Chapter 2. The Installation Process
33