IBM RS/6000 SP, Problem Determination Manual

Page: 213 / 316

This soft copy for use by IBM employees only.
Starting and Stopping the splogd Daemon
The splogd daemon is under System Resource Controller (SRC) control. It uses
the signal method of communication in the SRC. The splogd daemon is a single
subsystem and not associated with any SCR group. The subsystem name is
splogd.
In order to start the splogd daemon, use the
startsrc -s splogd
command. This
command starts the daemon with the default arguments and SRC options. The
splogd daemon is set up to be respawnable and to be the only instance of the
splogd daemon running on that particular node or Control Workstation.
Important
Do not start splogd from the command line without using the
startsrc
command to start it.
To stop the splogd daemon, you can use the command stopsrc -s splogd . This
will stop the daemon and does not allow it to respawn.
To display the status of the splogd daemon, issue the command
lsscr -s splogd
.
You can view the current SRC options and daemon arguments with the
command:
odmget -q
″
subsysname=splogd
″
SRCsubsys
You can change the default startup arguments with the command
chssys
.
Chapter 6. E r r o r Logging
193