IBM RS/6000 SP, Problem Determination Manual

Page: 30 / 316

This soft copy for use by IBM employees only.
2.2.2 AIX Software Components
The RS/6000 you are using as the Control Workstation (CWS) for RS/6000 SP
System must have the following software installed:
•
AIX Version 4.1 Base Operating System
• TCP/IP
•
NFS
• NIM file sets
Figure 6 shows the
lslpp
command used to check the base operating system
runtime environment components that are installed on your Control Workstation.
# lslpp -l bos.rte
Fileset Level State Description
----------------------------------------------------------------------
Path: /usr/lib/objrepos
bos.rte
4.1.4.0 COMMITTED Base Operating System Runtime
Path: /etc/objrepos
bos.rte
4.1.4.0 COMMITTED Base Operating System Runtime
Figure 6. Minimum Required BOS and Runtime Environment Components
Figure 7 shows the command to check Network Install Manager (NIM)
components that are installed on your Control Workstation. If it does not list all
of the required components, then install the missing NIM components from the
AIX install media before proceeding further.
# lslpp -l
″
bos.sysmgt.nim.*
″
Fileset Level State Description
-----------------------------------------------------------------------
Path: /usr/lib/objrepos
bos.sysmgt.nim.client
4.1.4.0 COMMITTED Network Install Manager -
Client Tools
bos.sysmgt.nim.master 4.1.4.0 COMMITTED Network Install Manager -
Master Tools
bos.sysmgt.nim.spot 4.1.4.0 COMMITTED Network Install Manager -
SPOT
Path: /etc/objrepos
bos.sysmgt.nim.client
4.1.4.0 COMMITTED Network Install Manager -
Client Tools
Figure 7. Minimum Required Components of Network Install Manager (NIM)
Figure 8 on page 11 shows the command used to check networking bundles that
are installed on your Control Workstation. If it does not list all of the required
components, then first install the missing components from the AIX install media
before proceeding further.
10
SP PD Guide