IBM RS/6000 SP, Problem Determination Manual

Page: 50 / 316

This soft copy for use by IBM employees only.
•
For a complete flow chart of what install_cw does, refer to Appendix A.2,
“The install_cw Script” on page 236.
Figure 14 shows a sample output of running the install_cw script.
13 entries added.
0 entries deleted.
0 entries updated.
0513-071 The sdr.sp2cw0 Subsystem has been added.
making SRC object
″
hb.sp2cw0
″
at system level PSSP-2.1
0513-071 The hb.sp2cw0 Subsystem has been added.
making SRC object
″
hr.sp2cw0
″
0513-071 The hr.sp2cw0 Subsystem has been added.
0513-085 The hardmon Subsystem is not on file.
0513-084 There were no records that matched your request.
0513-071 The hardmon Subsystem has been added.
13 entries added.
0 entries deleted.
1 entries updated.
0513-085 The splogd Subsystem is not on file.
0513-084 There were no records that matched your request.
0513-071 The splogd Subsystem has been added.
0513-059 The splogd Subsystem has been started. Subsystem PID is 15102.
0513-059 The sysctld Subsystem has been started. Subsystem PID is 16390.
Figure 14. Output of R u n n i n g install_cw Script
Figure 15 shows what gets added to the /etc/inittab file from running the
install_cw script.
sdrd:2:once:/usr/bin/startsrc -g sdr
sp:2:wait:/etc/rc.sp > /dev/console 2>&1
hardmon:2:once:/usr/bin/startsrc -s hardmon
hr:2:once:/usr/bin/startsrc -g hr
hb:2:once:/usr/bin/startsrc -g hb >/dev/null 2>/dev/console
splogd:2:once:/usr/bin/startsrc -s splogd
Figure 15. Portion of /etc/inittab That Gets Added f r o m R u n n i n g install_cw
Figure 16 shows what gets added to /etc/services from running the install_cw
script.
hardmon 8435/tcp
sdr 5712/tcp
heartbeat 4893/udp
Figure 16. Portion of /etc/services That Gets Added f r o m R u n n i n g install_cw
2.4.1 Problems Solving
If you have problems running the install_cw script, check following:
•
/usr/lpp/ssp/bin should be exported in your PATH.
• You should be logged on as a valid authenticated user of the system
management commands.
30
SP PD Guide