IBM RS/6000 SP, Problem Determination Manual

Page: 48 / 316

This soft copy for use by IBM employees only.
/usr/lpp/ssp/filec/sup/node.root/prefix
/usr/lpp/ssp/filec/sup/node.root/refuse
/usr/lpp/ssp/filec/sup/node.root/supperlock
/usr/lpp/ssp/filec/sup/power_system/list
/usr/lpp/ssp/filec/sup/power_system/lock
/usr/lpp/ssp/filec/sup/power_system/prefix
/usr/lpp/ssp/filec/sup/power_system/refuse
/usr/lpp/ssp/filec/sup/power_system/supperlock
You should never run base level PSSP software by itself. At minimum, you
should be on PTFset4 or PTFset8. PTFset11 is the latest full replacement set that
can be installed on base PSSP 2.1 software level. Various defects have been
fixed and feature enhancements have been made on the PSSP base level of
software. PTFs are available through Support Organizations, or online through
fixdist.
Table 4 lists various components and their sizes of PTFset11 available at the
time this document was written.
Table 4. Components and Sizes of the PSSP PTFset11
Component Size
ppe.poe.2.1.0.8 2063360
ppe.vt.2.1.0.4 1428480
ssp.authent.2.1.0.2 380928
ssp.basic.2.1.0.10 17014784
ssp.clients.2.1.0.5 1904640
ssp.csd.cmi.2.1.0.1 158720
ssp.csd.hsd.2.1.0.2 190464
ssp.csd.vsd.2.1.0.4 317440
ssp.css.2.1.0.8 6221824
ssp.docs.2.1.0.4 10412032
ssp.gui.2.1.0.6 1777664
ssp.jm.2.1.0.2 1333248
ssp.public.2.1.0.2 12348416
ssp.sysctl.2.1.0.2 539648
ssp.sysman.2.1.0.7 1111040
ssp.top.2.1.0.2 984064
2.3 Authentication Services Diagnostics
To initialize your primary authentication server on the RS/6000 SP Control
Workstation, you need to run the
setup_authent
command from the command line
on your Control Workstation. The Kerberos administrator needs to define a
kerberos master key, principal name, instance, password for your principal and
instance, and then again password before kerberos initialization for your
principal.instance can start. Step-by-step instructions of your interaction with
setup_authent
is explained in the SP Installation Guide. Details of what
setup_authent
does is explained in Chapter 3, “Kerberos” on page 71 under
3.4.1, “setup_authent” on page 74.
28
SP PD Guide