IBM RS/6000 7043 260, Service Manual

Page: 99 / 322

Table 3-1 (Page 6 of 28). Firmware Error Codes.
Error Code Description Action / Possible Failing FRU
22001001 Internal wrap test failed. Replace adapter.
22002001 Adapter failed to complete hardware
initialization. Replace adapter.
22010001 Adapter failed to complete hardware
initialization. Replace adapter.
22011001 Adapter failed to complete hardware
initialization. Replace adapter.
25000000 Memory controller failed. Replace the system board.
25010xxx Flash Update Problem
25010000 No diskette in drive. Insert diskette containing firmware
image.
25010001 Diskette seek error. 1. Retry function.
2. Replace diskette drive.
3. Replace diskette cable.
4. Replace I/O board. (See notes on
3-1.)
25010002 Diskette in drive does not contain an
*.IMG file. Insert diskette with firmware update file.
25010003 Cannot open OPENPROM package. Replace I/O board. (See notes on
3-1.)
25010004 Cannot find OPENPROM node. Replace I/O board. (See notes on
3-1.)
25010006 System id does not match image
system id. Make sure correct firmware update
diskette is being used with this system.
25010007 Image has bad CRC. Replace firmware updated diskette.
25010008 Flash is write protected, update
cancelled. 1. Turn off, turn on system unit and
retry.
2. Replace I/O board. (See notes on
3-1.)
25010009 Flash module is unsupported or not
recognized. Make sure correct firmware update
diskette is being used with this system.
2501000A Flash write protected. 1. Turn off, turn on system unit, retry.
2. Replace I/O board. (See notes on
3-1.)
25A0xxx0 L2 Cache controller problem. 1. Replace the processor card.
2. Replace the system board.
See error code 2B2xxx22 for xxx
definitions.
25A0xxx1 L2 Cache controller problem. 1. Replace the processor card.
2. Replace the system board.
See error code 2B2xxx22 for xxx
definitions.
Chapter 3. Error Code to FRU Index
3-7