IBM RS/6000 7043 260, Service Manual

Page: 101 / 322

Table 3-1 (Page 8 of 28). Firmware Error Codes.
Error Code Description Action / Possible Failing FRU
25A80203 Unable to expand target partition while
writing VPD data. Refer to Action under error code
25A80xxx.
25A80210 Setenv/$Setenv parameter error - name
contains a null character. Refer to Action under error code
25A80xxx.
25A80211 Setenv/$Setenv parameter error - value
contains a null character. Refer to Action under error code
25A80xxx.
25AA0xxx EEPROM problems. EEPROM problem resolution:
1. Ensure that the EEPROM Security
jumper is in the correct position if
doing a privileged-access password
install.
2. Retry the operation.
3. If retries do not solve the problem,
replace the I/O board. (See notes
on 3-1.)
25AA0000 Unable to unlock EEPROM. Refer to Action under error code
25AA0xxx.
25AA0001 Read-Recv error. Refer to Action under error code
25AA0xxx.
25AA0002 Read-Trans error. Refer to Action under error code
25AA0xxx.
25AA0003 Write-enable error. Refer to Action under error code
25AA0xxx.
25AA0004 Write-recv error. Refer to Action under error code
25AA0xxx.
25AA0005 Write-disable error. Refer to Action under error code
25AA0xxx.
25AA0006 Write-Trans error. Refer to Action under error code
25AA0xxx.
25AA0007 Unable to lock EEPROM. Refer to Action under error code
25AA0xxx.
25B00001 No memory modules detected in either
memory card 1 or 2. 1. Reseat any installed memory
card(s) and retry.
2. Reseat any installed memory
modules on the installed memory
cards.
3. Replace Memory Card(s).
Chapter 3. Error Code to FRU Index
3-9