IBM RS/6000 7043 260, Service Manual

Page: 107 / 322

Table 3-1 (Page 14 of 28). Firmware Error Codes.
Error Code Description Action / Possible Failing FRU
2B2xxx22 Processor disabled. Processor card.
Where xxx indicates the processor type
as follows:
651 200 Mhz Processor with
1MB of L2 cache.
654 200 Mhz Processor with
4MB of L2 cache.
2B2xxx31 Processor failed. Processor card.
See error code 2B2xxx22 for xxx
definitions.
2B2xxx42 Unsupported processor type. Processor card.
See error code 2B2xxx22 for xxx
definitions.
2B200402 Unsupported processor. Processor card.
2BA00xxx Service processor
2BA00000 Service processor POST failure. 1. Unplug the system power cable
and wait until the system power
indicator remains off and the
operator panel is blank.
2. Plug the system power cable back
in and retry the operation.
3. Replace the I/O board. (See notes
on 3-1.)
2BA00012 Service processor reports self-test
failure. 1. Unplug the system power cable
and wait until the system power
indicator remains off and the
operator panel is blank.
2. Plug the system power cable back
in and retry the operation.
3. Replace the I/O board. (See notes
on 3-1.)
2BA00013 Service processor reports bad NVRAM
CRC. 1. If problem persists, replace battery.
2. Replace the I/O board. (See notes
on 3-1.)
2BA00014 Service processor reports bad service
processor firmware. Use service processor firmware
diskette to re-program firmware.
2BA00017 Service processor reports bad or low
battery. 1. Replace the battery.
2. Replace the I/O board. (See notes
on 3-1.)
2BA00018 EPOW test failure. 1. Replace the I/O board. (See notes
on 3-1.)
2BA00019 IRQ13 test failure. Replace the I/O board. (See notes on
3-1.)
Chapter 3. Error Code to FRU Index
3-15