IBM RS/6000 7043 260, Service Manual

Page: 133 / 322

Table 3-5 (Page 5 of 11). Firmware Checkpoints.
Checkpoint Description Action/
Possible Failing FRU
E175 BootP request Refer to “Boot Problems/Concerns” on
page 3-48 for general considerations.
1. Turn off then on, and retry the boot
operation.
2. Verify the network connection
(network could be down).
3. Have network administrator verify
the server configuration for this
client.
E176 TFTP file transfer See the note on 3-34.
E177 Transfer failure due to TFTP error
condition See the note on 3-34.
E178 Create PCI token ring node See the note on 3-34.
E180 Service Processor Command setup See the note on 3-34.
E183 Service Processor Post See the note on 3-34.
E190 Create ISA node See the note on 3-34.
E193 Initialize Super I/O. See the note on 3-34.
E196 Probe ISA bus. See the note on 3-34.
E19B Create service processor node. See the note on 3-34.
E19C Create tablet node. See the note on 3-34.
E19D Create nvram node. See the note on 3-34.
E19E Real time clock (RTC) creation and
initialization. Refer to error code 28030xxx in
“Firmware/POST Error Codes” on
page 3-2.
E19F Create eeprom node. See the note on 3-34.
E1AD See description of checkpoint E1DE.
See the note on 3-34.
E1B0 Create lpt node. I/O board (See notes on 3-1.)
See the note on 3-34.
E1B1 Create serial node. See the note on 3-34.
E1B2 Create audio node. I/O board (See notes on 3-1.)
See the note on 3-34.
E1B3 Create 8042 node. I/O board (See notes on 3-1.)
See the note on 3-34.
E1B6 Probe for (ISA) keyboard. I/O board (See notes on 3-1.)
See the note on 3-34.
E1BA Enable L2 cache. See the note on 3-34.
Chapter 3. Error Code to FRU Index
3-41