IBM RS/6000 44P Series 270, Service Manual

Page: 46 / 346

Quick Entry MAP Table of Contents
Problem Description Page No.
Service Actions 28
System Stops With an 8-Digit Number Displayed 28
System Stops With a 4-Digit Number Displayed 28
System Stops With a 3-Digit Number Displayed 29
System Stops or Hangs With Alternating Numbers Displayed in the
Operator Display Panel. 29
Display Problem (Distortion, Blurring, Etc.) 29
Power and Cooling Problems 30
Flashing 888 in Operator Panel Display 30
Other Symptoms or Problems 30
You Cannot Find the Symptom in this Table 33
Symptom Action
Service Actions
You have parts to exchange or a corrective
action to perform.
1. Go to Chapter 9, “Removal and Replacement
Procedures”, on page 223.
2. Go to "MAP 410: Repair Checkout" in the
RS/6000 and
Eserver
pSeries Diagnostics
Information for Multiple Bus Systems .
You need to verify that a part exchange or
corrective action corrected the problem. Go to "MAP 410: Repair Checkout" in the
RS/6000 and
Eserver
pSeries Diagnostics
Information for Multiple Bus Systems .
You need to verify correct system operation. Go to "MAP 410: Repair Checkout" in the
RS/6000 and
Eserver
pSeries Diagnostics
Information for Multiple Bus Systems .
System Stops With A 8-Digit Number Displayed
The system stops with an 8-digit error code
displayed in the operator panel display or on
the console. Record the error code. Go to Chapter 5, “Error
Code to FRU Index”, on page 93.
System Stops With A 4-Digit Number Displayed
28
Service Guide