IBM RS/6000 44P Series 270, Service Manual, Page: 35 / 346

FRU Name
AIX Location
Code Physical
Location Code Physical
Connection Logical
Identification
I/O fan connector P2/F2 Fan connector J3
at system board
CEC fan
connector P2/F1 Fan connector
J21 at system
board
Operator Panel
Operator panel L1 I/O board
connector J1
Operator panel
Connector P2/L1 I/O board
connector J1
Power Supply
Power supply V1
Battery
Battery V2 I/O board
connector J11
Notes:
1. The physical location code for the PCI slots, when empty, uses the P1/Ix notation, where the
’/’ identifies an integrated device (in this case the empty slot). A PCI device plugged into the
slot uses the P1-Ix notation, where the ’-’ identifies a plugged device.
2. The SCSI bus IDs are the recommended values. The SCSI IDs shown for media devices
indicate how the devices are set when they are shipped from the factory. Field installations
may not comply with these recommendations.
Specifications
The mechanical packaging, cooling, power supply, and environmental requirements for
the server are as follows:
Dimensions
v
With pedestal:
– Height - 615 mm (24.2 inches)
– Depth - 681 mm (26.8 inches)
– Width - 340 mm (13.4 inches)
v
Without pedestal:
– Height - 610 mm (24.0 inches)
– Depth - 681 mm (26.8 inches)
– Width - 221 mm (8.7 inches)
Chapter 1. Reference Information
17